to work', while the other was saying this is due to endian issue. Someone was saying, 'We had to do modification on the Linux kernel driver to get. I looked thought information at I210 detection issues under embedded linux. NIC BUS DEV FUN Silicon Memory Type Present Do Not Distribute.Ĭopyright(C) 2013 by Intel(R) Corporation Intel(R) Eeprom ARM Tool ARM OTP Programming Tool

But the tools crashed with 'Bus error' as ~/eepromARMTool#. These information seems to me, the chip is detected and should be working, so I went on to download the mac address into the chip with the intel eepromARMtool. Pci_bus 0000:01: busn_res: end is updated to 01 PCI: bus1: Fast back to back transfers disabled PCI: bus0: Fast back to back transfers disabled Im圆q-pcie 1ffc000.pcie: PCI host bridge to bus 0000:00 Or from yocto chroot (I added a yocto chroot into the android l5 release) ~# lspci -mĠ0:00.0 'PCI bridge' 'Synopsys, Inc.' 'Device abcd' -r01 '' ''Ġ1:00.0 'Ethernet controller' 'Intel Corporation' 'Device 1531' -r03 'Intel Corporation' 'Device 0000' * Determine if the QSFP+ PHY is dual speed or not.I need helps in adding i210 to im圆 sabrelite with boundary android l5 kernel (3.10.53). ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) -1771,7 +1771,7 s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) || If (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) & * Determine if the SFP+ PHY is dual speed or not. If, at your own risk, you want to support both 1Gb and 10Gb with SFP+ modules that have not been tested with both-and are not advertised to work with both-just make multispeed_fiber always true:

Works just as well as you hoped it would.

Intel i210 driver open soursce